Fingertip Pulse Oximeter Blood Oxygen Meter SpO2 Monitor

Display Format: LCD Display
SpO2 Measuring Range: 0% ~ 100%
Pulse Rate Measuring Range: 30 bpm ~ 250 bpm
Pulse Wave Display: columniation display and the waveform display.
Power Requirement: 2x 1.5 V AAA Alkaline battery ( or using the rechargeable battery instead), adaptable range: 2.6 V – 3.6V
Power Consumption: Smaller than 30 mA
Resolution: 1% for SpO2 and 1 bpm for Pulse Rate.
Measurement Accuracy: ±2% in a stage of 70%-100% SpO2, and meaningless when the stage being smaller than 70% ±2 bpm during the pulse rate range of 30-99 bpm and ±2% during the pulse rate range of 100~250 bpm. Clinical Trial: SpO2 regression plot & Bland-Altman plot, Refer to Figure 2 & Figure 3.
Measurement Performance in Weak Filling Condition: SpO2 and pulse rate can be shown correctly when the pulse-filling ratio is 0.4%. SpO2 error is ±4%, pulse rate error is ±2 bpm during the pulse rate range of 30~99 bpm and ±2% during the pulse rate range of 100~250 bpm.
Resistance to surrounding light: The deviation between the value measured in the condition of man-made light or indoor natural light and darkroom is less than 1%.
It’s equipped with a function switch: The product will enter the standby mode when no signal is in the product within 5 seconds.

Optical Sensor:
Red light ( wavelength is 660 nm, 6.65 mW)
Infrared (wavelength is 880 nm, 6.75 mW)